Undulators and Accelerators
Magnet Assemblies
We are your reliable partner when it comes to the development and production of a wide range of magnet assemblies. The positioning of magnets with extreme precision, especially small one, and the very high forces associated with large-volume magnetized parts, make the assembling of magnet systems a challenging task. For this process we can apply our extensive experience in the design and construction of assembly tools and our expert knowledge in the selection of a suitable bonding process.
Amorphous and Nanocrystalline Cores
Tape-wound toroidal and oval cores made of nanocrystalline VITROPERM® or amorphous VITROVAC® offering low losses over the full permeability range between µ~3,000 to µ>100,000.
9% to 27% Cobalt-Iron Alloys VACOFLUX®
Cobalt-Iron alloys have the highest saturation polarization of all known magnetic alloys. The low cobalt content VACOFLUX® qualities were developed to offer an attractive price level for well defined applications.
49% Cobalt-Iron Alloys VACOFLUX® and VACODUR®
Thanks to their high magnetic saturation of up to 2.4 T, the cobalt-iron (CoFe) alloys VACOFLUX® and VACODUR® are generally suitable for all applications where high flux density and minimum weight are required.
Qualities with a cobalt content of 49 % and 2 % vanadium are offering in addition low coercivity forces and therefore best possible parameters for highest performance electric motors/generators and magnetic actuators.
With adapted annealing temperatures, the VACODUR alloys can be used to satisfy demanding strength requirements, e.g. for high speed rotations.